Sportster Sitze

1 liter bottle. Silicon based. Non aggressive for painted surfaces, plastics. DOT 5 is non-hygroscopic and will therefore not absorb water. Not compatible with anti-lock brakes. Developed for use in stock and aftermarket H-D V-Twin models. With characteristics that can be trusted to give the ultimate performance for your bike in all circumstances. Proudly engineered and manufactured in The Netherlands. Note: Do not mix with DOT 3 & 4 brake fluids. Tech tip: If you want to use DOT 5 may be easier to decide if it's right for you with some added knowledge about this type of brake fluid. DOT 5 silicone is non-aggressive for painted surfaces, plastics and has anti-corrosive characteristics, is non-hygroscopic and will therefore not absorb water. Great characteristics for vehicles that are not used much. However, when water accumulates in the brake system over time, and it is not absorbed by the brake fluid, in theory it could create pockets of water which could boil in extreme circumstances. This could result in vapor lock and total brake failure. Since DOT 5 silicone does not absorb water the accumulated water may not fully be removed from the brake system when the brake fluid is changed. DOT 5 silicone may never be mixed with DOT 3 or 4 brake fluids. It is also not compatible with ABS (Anti-lock Brake System) or ASR (Anti Slip Regulation) since it will foam easier. Note that The Factory has used DOT 5 up to around 2006, about the time when ABS was introduced...

Fits: > Up to 2005 Softail, Dyna, V-Rod, up to 2004 FLT/Touring, up to 2006 XL 904509

07-20 Sportster, 06-17 Dyna, 06-23 Softail, 05-23 Touring, 09-23 Trike, 06-17 V-Rod, 15-20 Street, 20-21 LiveWire, 21-23 Pan America, 21-23 Sportster RH  653651

DOT 4 High Performance Brake Fluid 1 x 250 ml

RevTech High Performance DOT 4 Brake Fluid: Engineered performance in both drum and disc brake systems, with or without ABS/ASR! Works for hydraulic clutches as well.

Ultimate Rust Protection: Keeps your brake system safe and rust-free, ensuring long-lasting reliability.

Optimal Heat Management: Best heat absorption and transfer for peak performance under pressure.

Seal and Metal Safe: Won't harm seals, metals, or alloys – protects and prolongs your system's life.

Smooth Lubrication: Reduces wear to a minimum, thanks to superior lubricity.Stable and Clean: No deposits, low viscosity at cold temps – performs like great in any climate.High Wet Boiling Point: Prevents vapor lock during intense braking, boosting safety and reliability.Regular Maintenance Required: Check and change your brake fluid regularly due to its hygroscopic nature – stay safe!Key Specs: Yellow color, density at 20°C: 1.069 kg/l, kinematic viscosity at 40°C (100°C): 7.8 cSt (2.2 cSt), flash point: 120°C, pour point: 36°C, dry (wet) boiling point: >260°C (>155°C).Important Note: Brake fluid can damage paint – rinse immediately if spilled. Store properly to avoid contamination.Compatibility Warning: Never use in systems with silicone-based fluids (like DOT 5). Do not mix with DOT 5.CCE930008